Sony NVD-U03E Bedienungsanleitung Seite 7

2
Check the map(s) that you want to add, and uncheck any
map(s) you want to remove.
3
Click "Transfer ."
The confirmation display appears.
4
Click "OK."
Addition or removal of the map starts.
Notes
• The display differs depending on the map data, model, etc.
• Addition/removal time differs depending on the computer performance or map type.
• Due to the nature of the updated, highly-detailed map content, the area may be
different from the map data used now.
• If you cannot select the map, refer to "Freeing up free space on the navigation unit"
(page 5).
Completing the map addition/removal
The addition/removal of the map is completed when the above message is displayed.
1
Click "OK."
2
Click "Exit" to quit the application.
Turn off the navigation unit by the POWER switch on its bottom, and disconnect the
cables. Turn on the navigation unit again.
7