Primo PR409IB Gebrauchsanleitung Seite 43

• Any injury or damage caused by failure to comply with these
rules are at your own risk. Neither the manufacturer, importer,
or the supplier may be held liable.
I ELECTRICAL WARNINGS
• In order to avoid a hazard this appliance must not be
supplied through an external switching device, such as a
timer or a separate remote control, or connected to a circuit
that is regularly switched on and off by the utility.
• The appliance must be disconnected from its power source
when not in use, during service and when replacing parts.
Allow to cool before putting on or taking off parts, and before
cleaning the appliance. To disconnect, turn controls to "OFF"
or "0" position, then remove the plug from the wall. Never pull
the cord or appliance to remove the plug from the socket.
• Before use, check carefully that the electric tension and
frequency of the power net at your home match the
indications on the rating label of the appliance.
• The appliance must be plugged into an appropriate outlet
that is installed and grounded in accordance with local
installation regulations.
• Do not let the power supply cord hang over the edge of a
counter, or touch hot surfaces.
• Keep the power cord away from hot parts and don't cover the
appliance.
• Unwrap the cord completely to prevent overheating of the
cord. Do not allow the power cord supply to run underneath
or around the unit.
• Do not operate this appliance with a damaged cord or plug
or in the event the appliance malfunctions or has been
damaged in any manner. Return the appliance to the PRIMO
Service Department or its service agent for examination,
repair, or electrical or mechanical adjustment. Do not try to
repair the appliance yourself.
WWW.PRIMO-ELEKTRO.BE
43