Sony TMR-BT8iP Bedienungsanleitung Seite 11

Press and hold the POWER button of the bluetooth receiving
device for 7 seconds or more to standby for pairing while the
unit is turned off.
Notes
 Passcode* of this unit is fixed at "0000", "1234" or "8888." Depending on the
Bluetooth receiving device, it may be necessary to input the passcode (in this
case, "0000", "1234" or "8888"). This unit cannot be paired with a Bluetooth
receiving device whose passcode is not "0000", "1234" or "8888."
 If the Bluetooth receiving device requires a passcode, input "0000."
* Passcode may be called "Passkey, " "PIN code, " "PIN number, " or "Password. "
5
Press and hold the power button of this unit for more than about 7
seconds to enter "Pairing in process."
After about 1 second, the indicator will flash twice but keep
pressing the power button.
Notes
 When first power on this unit after initialize, this unit will enter the "Pairing
in process" automatically.
 The pairing information is initialized if you press and hold the power button
for 15 seconds. The indicator lights up for 5 seconds before the initialization
starts. Release the button immediately when the indicator lights up.
When the indicator of this unit flashes quickly, stop pressing it.
This unit enters "Pairing in process. "
This unit's indicator status will vary as follows, and pairing is
established with the Bluetooth receiving device.

Continued
11
GB