Cleaning And Maintenance; Replacing The Fuse; Inserting/Replacing The Battery - Dimavery GA-10 Bedienungsanleitung

5. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the battery. Maintenance and service operations
are only to be carried out by authorized dealers.
In order to replace the battery please refer to "Inserting/exchanging battery".
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

5.1 Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rear panel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.

5.2 Inserting/Replacing the battery

Please refer to the explanations under Operating Determinations.
Open the battery cover and remove it.
If replacing the battery, remove the old battery from the battery compartment.
Only replace by the same type or similar types recommended by the manufacturer.
Remove empty batteries in accordance with the instructions of the manufacturer.
Insert the battery and make sure that the poles are correct.
Replace the battery cover and close it.
In order to have a long battery life, you should only use alcaline batteries.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Danger of explosion when batteries are replaced improperly.
Caution!
23/24
00046217.DOC, Version 1.2