Connections - Dimavery GA-10 Bedienungsanleitung

8. LENGTH
Used to set the reverb length.
9. DEPTH
Used to set the reverb depth.
10. VOLUME-CONTROL
With the VOLUME control, you can adjust the output signal.
11. LINE OUT
The Line Out allows connection of further devices for signal processing.
12. PHONE
Use this socket to connect the headphones. The headphone plug turns the built-in speaker off.
13. POWER SWITCH
Press this button to start operation.

4.3 Connections

Occupation jack plug:
Unbalanced use of
mono 1/4" jack plugs
Tip =
Signal (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp
Occupation jack plug/stereo-channels:
Tip = Left, Ring = Right
Accessory Insert-cable/adapter:
Jack plug stereo/2 jack socket mono /10.......... No. 30226600
Cable 1/4" plug to 1/4" plug 3,0m black.............. No. 3021050N
Patchcord 1/4" plug 6pcs 60cm stereo ............... No. 3021005N
Balanced use of
stereo 1/4" jack plugs
Tip =
hot (+)
Ring =
cold (-)
Sleeve =
Ground / Shield
Tip
Ring
Sleeve
Strain relief clamp
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
22/24
00046217.DOC, Version 1.2