Cleaning And Maintenance - Dimavery BA-15 Bedienungsanleitung

BA-60
INPUTS
HIGH LOW VOLUME
1. HIGH INPUT
Here, you can connect the instrument via balanced 1/4" stereo jack.
2. LOW INPUT
Here, you can connect the instrument via balanced 1/4" stereo jack.
3. VOLUME-CONTROL
With the VOLUME control, you can adjust the output signal.
4. BASS-CONTROL
Used to increase or lower the LOWs of the input signal.
5. MID-FREQ-CONTROL
With the MID-FREQ control, you can adjust the frequency of the MID-Control.
6. MID-LEVEL-CONTROL
Used to increase or lower the MIDs of the input signal.
7. TREBLE-CONTROL
Used to increase or lower the HIs of the input signal.
8. HEADPHONE
Use this socket to connect the headphones. The headphone plug turns the built-in speaker off.
9. EFFECT SEND-SOCKET
Use this socket to connect your sound effector.
10. EFFECT RETURN-SOCKET
Use this socket to connect your sound effector.
11. POWER SWITCH
Press this button to start operation.
4.3 Connections
Occupation jack plug:
Unbalanced use of
mono 1/4" jack plugs
Tip =
Signal (+)
Sleeve =
Ground / Shield
Tip
Sleeve
Strain relief clamp

5. CLEANING AND MAINTENANCE

EQUALITION
BASS MID-FREQ MID-LEVEL
Balanced use of
stereo 1/4" jack plugs
Tip =
hot (+)
Ring =
cold (-)
Sleeve =
Ground / Shield
Tip
Ring
Sleeve
Strain relief clamp
For connection of balanced and
unbalanced plugs, ring and sleeve have
to be bridged at the stereo plug.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
EFFECT
TREBLE HEADPHONE SEND RETURN
9 10
Occupation jack plug/stereo-channels:
Tip = Left, Ring = Right
Accessory Insert-cable/adapter:
Jack plug stereo/2 jack socket mono /10
No. 30226600
Cable 1/4" plug to 1/4" plug 3,0m black
No. 3021050N
Patchcord 1/4" plug 6pcs 60cm stereo
No. 3021005N
19/20
BA-60
BASS AMPLIFICATION
POWER
11
00046229.DOC, Version 1.1