Herunterladen Diese Seite drucken

Axis Communications P3287-LVE Installationsanleitung Seite 6

Vorschau ausblenden Andere Handbücher für P3287-LVE:

Werbung

English
Safety information
Other message levels
Important
Indicates significant information which is
essential for the product to function correctly.
Note
Indicates useful information which helps in
getting the most out of the product.
Safety instructions
N N O O T T I I C C E E
The Axis product shall be used in compliance
with local laws and regulations.
This product is for professional use.
Install this product at a safe distance from
children.
Axis recommends using a network cable of
category CAT5e or higher.
Store the Axis product in a dry and ventilated
environment.
Avoid exposing the Axis product to shocks or
heavy pressure.
Install the product using screws and plugs
appropriate for the material (e.g. wood, metal,
sheet rock, stone).
Do not install the product on unstable poles,
brackets, surfaces or walls.
Use only applicable tools when installing the
Axis product. Using excessive force with power
tools could cause damage to the product.
Use a soft cloth dampened with pure lukewarm
water to clean the device.
Don't use chemicals such as window cleaner or
acetone to clean your device.
Use only accessories that comply with the
technical specification of your product. These
can be provided by Axis or a third party. Axis
recommends using Axis power source
equipment compatible with your product.
Use only spare parts provided by or
recommended by Axis.
Do not attempt to repair the product yourself.
Contact Axis support or your Axis reseller for
service matters.
Use a yellow/green colored grounding cable of
at least 0.5 mm
Transportation
N N O O T T I I C C E E
When transporting the Axis product, use the
original packaging or equivalent to prevent
damage to the product.
Battery
The Axis product uses a 3.0 V BR1632 lithium battery
as the power supply for its internal real-time clock
(RTC). Under normal conditions this battery will last
for a minimum of five years.
Low battery power affects the operation of the RTC,
causing it to reset at every power-up. When the
battery voltage is low, a log message will appear in
the product's server report.
CAUTION
Do not replace the battery yourself. Contact Axis
support if the log message requests a battery
change.
Lithium coin cell 3.0 V batteries contain 1,2-
dimethoxyethane; ethylene glycol dimethyl ether
(EGDME), CAS no. 110-71-4.
Dome or front glass
N N O O T T I I C C E E
Be careful not to scratch, damage or leave
fingerprints on the dome or front glass since
this can decrease image quality. Keep the
protective plastic on until the installation is
complete.
Don't clean a dome or front glass that looks
6
2
or 20 AWG.

Werbung

loading

Diese Anleitung auch für:

P3285-lveP32-serieP3288-lve