Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Locking/unlocking the control panel
E
D
C
Adjusting the temperature in the appliance
INFORMATION!
The factory default setting is the recommended temperature of -18 °C.
After the appliance is switched on, it may take several hours for the set temperature to be reached.
Do not place any food into the refrigerator before the set temperature is reached.
E
D
C
INFORMATION!
Temperature inside the appliance is affected by the temperature in the environment and by how
often the lid is opened. Adjust the temperature setting accordingly.
Locking/unlocking: To lock or unlock the control unit, press the B and
C keys simultaneously and hold them for 3 seconds. When the control
A
unit is locked, the symbol E is lit; when it is unlocked, the symbol E is
off, and you can set the temperature and operating mode.
Automatic lock: Approximately 40 seconds after you have pressed the
most recent key, the keys are locked automatically.
B
Control unit standby
60 seconds after the most recent key has been pressed, the control unit
switches to standby mode. All indicators on the control unit will be
switched off; only the E symbol will be lit.
Cancelling the standby mode: briefly press the B or C key.
INFORMATION!
Pressing the B or C button once displays the current temperature
in the appliance, while pressing it twice displays the set temperature.
•
Set the desired temperature using the C key.
-
If the control unit is unlocked (symbol E is not lit), the
A
temperature setting will be changed upon the first touch of the
C key.
-
If the control unit is locked (symbol E is lit), first unlock it by
pressing the B and C key simultaneously and holding them for
3 seconds. Current temperature inside the appliance will be
B
displayed. The next time you press the C key, the set temperature
will be displayed; by pressing the C key again, the temperature
setting will change.
•
The setting is stored automatically approximately 3 seconds after
you have last pressed any key. The set temperature flashes for 3
seconds. After approximately 3 seconds, the actual temperature in
the appliance is indicated on the display unit.
•
Temperature in the appliance can be set in the following sequence:
»-16->-17->-18...-22->-23->-24->-16«.
EN 13
Werbung
