Preparing For Use; Device Use - Royal Catering Rcmz-800 Bedienungsanleitung

3.2.

Preparing for use

The temperature of environment must not be higher than 40°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is being used. There should be at least
10 cm distance between each side of the device and the wall or other objects. The device should always be
used when positioned on an even, stable, clean, fireproof and dry surface, and be out of the reach of
children and persons with limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must be properly grounded
and correspond to the technical details on the product label.
3.3.

Device use

CAUTION!

Most food products are powdered after 30 seconds of operation, hard materials need about 1
minute

Too long operation may cause charring of the product and damage the engine.

Avoid processing products that cover more than half of the container (when processing one large
product)
OPERATION INSTRUCTIONS
1. Unpack the device and make sure all elements are complete.
a) After unpacking, assemble the device.
b) Check if the elements of the device are not damaged.
2. Loosen the locks and open the grinder cover.
a) Make sure the container has been cleaned after the last use.
b) Check if the blades are properly assembled:

Blades assembly:
(The blades should be installed in the order presented on the diagram).
3. Place the workpiece/workpieces in the container.
a) If the workpiece is poured into the container, do not exceed the level marked with the MAX line.
4. Mount the cover on the grinder container, and make sure that the cover loosely laps on the
container.
5. Lock the cover with the locks and tighten the locks gently.
CAUTION! Make sure that the stopwatch knob is in the OFF position before connecting the grinder
toa power source.
EN