Power Supply - Sauermann Si-Rm350 Kurzanleitung

5. Connections description
(1)

6. Power supply

4 × LR6 or AA 1.5 V batteries
7. Connect a probe
10:10 Menu
Measurements / Tests
Measurement settings
Wireless connection
General settings
Fault tree analysis
Data recording
Device information
Go to Wireless connection with ▲
and ▼ and press OK.
10:10 Wireless connection
>
> Wireless
> Scan devices
> Registered devices
>
>
>
Wireless is ON. Go to Scan
devices and press OK.
(1) Port for wired
(2)
temperature probe T1
(2) Port for wired
temperature probe T2
(3)
(3) USB-C port as
alternative power
source to batteries
USB-C +
10:10 Scan devices
Si-RV4
ON
>
>
Turn on the
wireless
probe.
The probe is detected.
Press OK
10:10 Available Device
Connected
Name
Type
Serial number
Address
Firmware version
Probe is connected: its features are
shown. Probe is ready to measure
and display data.
XXXXXXXXXXXX >
1
Si-RT7
Temperature
XXXXXXXXXXXX
xx:xx:xx:xx:xx:xx
x.x