Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Software
Note:
The configuration of function buttons for device and logic functions is only possible in
combination with the YOUVI software. When using HTTP calls, please note that only function
calls are supported - web page requests are not. These HTTP function calls can trigger corre-
sponding actions on external systems, such as a Gira HomeServer.
Software
The panel can be operated both with the supplied YOUVI software and with other Windows-
compatible software.
Tip:
After commissioning and setting up the panel, we recommend that you create a backup
using the optionally available recovery stick from PEAKnx.
Operating system
The operating system used is Microsoft Windows IoT Enterprise LTSC. Other drivers and
programs for the visualisation of building information and for building control can be installed
later.
Note:
PEAKnx provides no service and no warranty for software products from other
companies and in case of OS driver updates.
YOUVI Software package
The YOUVI Basic visualisation software included in the scope of delivery is used to control
KNX devices such as sockets, switches, lights, dimmers, RGB lights, heaters, blinds or shutters.
Thanks to the IP router included in the software package, the panel can run YOUVI's vvisualisa-
tion without an external server or additional bus coupler. Only the connection to the IP network
and the KNX bus (via the integrated KNX connection on the panel) is necessary.
Setting up the visualisation
After commissioning, set up the visualisation as described in the enclosed quick start quide. It is
assumed that all KNX actuators have already been parameterised via the ETS.
Technical support
If you experience problems with your Control 16, please contact our PEAKnx Support Team:
Mail: support@peaknx.com
▪
Create a Support Ticket:
▪
▪
Phone: +49-6151-279 1825
https://helpdesk.peaknx.com/
25
Werbung
