• Do not ingest or inhale fog fluid. Once you inhale any fog fluid, please contact
911immediately.lf you have fog fluid on your skin or fog fluid goes into your eyes,
rinse it thoroughly with water and contact a medical doctor
Danger of Explosion
• Never put any type of flammable liquids (example: gas, oil, alcohol, perfumes etc)in
the water tank. Do not mix these liquids with fog fluid.
• Use only fog fluid.
• Always make sure the water tank is full before using the fog machine.
• Attempting to operate this machine without fluid will result in overheating and pump
damage.
• lf your machine operates abnormally, just unplug it and discharge the fog fluid from
the water tank, and find a qualified electrician or service centre to repair the
machine.
• Never transport this machine filled with any fluid. Always drain fluids prior to
transporting it.
MAINTENANCE
• After the machine has been used for about a month, please add the mixture of 20 %
distilled water and 80% vinegar to the water tank and whilst clean the cleaning pipe.
• According to the normal operation, it will reach the optimal effects after washing 10-
30 minutes in a continuous way.
• After cooling down, reinstall the nozzle and add the atomized liquid for later use.
• Clean the machine with dry cloth and keep it dry for storage.
Main Technical specifications:
• Voltage:220-240V~50/60Hz
• Warm-up time:2-3 minutes
• Oiler capacity:0.3 liters
HOW TO USE:
1.Pour the atomized liquid (excluding) into the water tank and plug the power
cord(including)into the power socket. Notice: Make sure the metal liquid nozzle is
totally immersed in atomized liquid , Otherwise, the equipment won't work properly.
2.Turn on the fog machine.
3.Starts preheating. After 2-3 minutes of warming up, there is a red light will be shown
on the wireless receiver, indicating that it has been heated up and ready to spray.
So you can either press the red button of the wireless receiver or
remote.(Battery type: AAA*2 Not included)
4.Press
button on the remote. lt will spray fog continuously for about 20s, then
stop spraying and then start to preheat again. When another preheating finished,
it's ready to emit fog again.
2
button on the