HOMCOM F00-002V90 Bedienungsanleitung Seite 2

Thank you for purchasing this fog machine. Prior to use, please read all of the
instructions. By following all these operations, safety and maintenance instructions,
please make sure that your fog machine has a long-term use.
CAUTION!
Please read this manual carefully before operating!
CAUTION:
• Risk of electric shock! Disconnect the appliance from the electric supply before
refilling fog fluid, before performing any maintenance, or before cleaning the
machine.
• Check the level of fluid before and during use to make sure there is enough fluid in
the tank. Operating the machine without fluid will cause severe damage.
• Keep this appliance dry and put it in a dry environment.
• Not suitable for outdoor use.
• Use 3-prong grounding receptacle only. Please make sure the machine is powered
up at rated voltage before use.
• Always unplug the machine before refilling the fluid tank.
• Always keep this fog machine in a upright position. Never use it on an uneven
surface.
• This fog machine is NOT water proof or water-resistant. lf water, fog fluid (not inside
the water tank )gets inside the machine, unplug this machine immediately and
contact maintenance service centre for help before using it again, just in case of
electric shock.
Danger of burns
• Keep out of reach of children. This product is for adults only.
• Never leave this machine unattended.
• Never aim this machine directly at people or animals.
• Put the fog machine in a well-ventilated place.
• Never cover any vent holes on the machine, and leave at least one foot of space
around the machine while it's running, which allows air to move in and out of the
machine.
• Never aim this machine at open flames.
• If the supply power cord is cut or otherwise damaged. You should ask a qualified
electrician or a service center for help.
• In the process of using this machine, the fog nozzle will become will hot (UP to600
F).Keep flammable items at least 3 feet away from the fog nozzle.
• Before cleaning or maintaining it, always allow the machine to cool to room
temperature.
1