Linea Tielle GLASS CLEANER PRO Bedienungsanleitung Seite 61

4. Maintance
Before performing cleaning and maintance on GLASS CLEANER PRO, Power OFF and
unplug GLASS CLEANER PRO from the glasses.
4.1 Cleaning Pad
Turn Glass Cleaner Pro over and remove the Cleaning Pad. Soak the Cleaning Pad in 20 , clean
water for 2 minutes. Hand wash with mild detergent and lay flat to dry. Allow it to dry completely
before re-attaching it to Glass Cleaner Pro.
CAUTION:
Do not use a wet Cleaning Pad on Glass Cleaner Pro or it may slip on the window. Washing the
Cleaning Pad regularly can extend its service life. If the Cleaning Pad becomes worn or no longer
fits properly within the Velcro area, replace it with a new one to achieve best cleaning performance.
4.2 Unit Bottom Maintance
Fan
Turn Glass Cleaner Pro over and wipe
any debris from the Fan with a dry cloth
to maintain suction well.
Edge Detection Sensors
Turn Glass Cleaner Pro over and
wipe the five Edge Detection Sensors
clean with a dry cloth to maintain their
effectivess.
Side Rollers
Turn Glass Cleaner Pro over and wipe
the four Side Rollers with dry cloth to
maintain their effectives.
Squeegees
Turn Glass Cleaner Pro over and wipe
the squeegees with a dry cloth to
maintain their effectivess.
10