Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Operating
Loop one end of the
Safety Tether to end A
on the Glass Cleaner Pro
Power Cord and tight.
CAUTION:
* If the length of the power cord restricts Glass Cleaner Pro's movement, a Glass Cleaner Pro
Extension Cord can be used. Disconnect end A and end B, and connect them with both ds of the
Extension Cord respectively and tight.
* Only one Extension Cord can be used for Glass Cleaner Pro.
3.5 Place the Safety Pod
Wipe the surface of the Safety Pod's suction cup clean with the provided Finishing Cloth.
• If Glass Cleaner Pro is being used to clean an inside
window:
Press the Safety Pod FIRMLY on the top corner of the inside
window. Make sure the Safety Pod is attached securely in
Place.
• If Glass Cleaner Pro
window:
Press the Safety Pod FIRMLY on the inside of the window
being cleaned. Makesure the Safety Pod is attached and
securely in place.
3.6 Spray Cleaning Solution
CAUTION:
* Glass Cleaner Pro is recommded to be used with Glass Cleaner Pro Cleaning Solution. Using
other cleaners may reduce Glass Cleaner Pro's performance.
* Spray the upper and lower sides of the Cleaning Pad with the provided Glass Cleaner Pro Cleaning
Solution times each. After spraying, wipe the bottom of Glass Cleaner Pro with a dry cloth.
Connect end A and end B and tight.
is being used to clean an outside
Loop the other end of the Safety
Tether around the Safety Pod's
channel and pull it tight.
6
Werbung
