Linea Tielle GLASS CLEANER PRO Bedienungsanleitung Seite 60

3. Operating
3.9 Stop
When GLASS CLEANER PRO completes its cleaning cycle, it returns to the place it started
and beeps.
Remove Glass Cleaner
Glass Cleaner Pro's Handle. Press and
hold for approximately 5 seconds and the
fan will stop. Remove Glass Cleaner Pro
from the window. Polish away any marks
left on the glass from Glass Cleaner Pro's
removal with a mopping cloth.
Remove the Safety Pod
Polish away any marks left on the
glass from the Safety Pod's removal
with the provided Finishing Cloth.
CAUTION: If Glass Cleaner Pro has a problem and the alarm Light flashes RED, please firstly
check if the power cord connected well and the unit is powered on. The LED light should be in
blue color if The power connection is good, and it will automatically starts cleaning. If the RED
light keeps flashing though power connection is good, please use remote control direction stick
operate Glass Cleaner Pro leave current position. When the blue light turns solid, press START/
PAUSE button to restart.
Power OFF
Move the Power Switch to the
"o" position.
Unplug
Glass Cleaner Pro
9