Dell PowerConnect 3524 Handbuch Zum Einstieg Seite 42

3
Next, an IP address is setup. The IP address is defined on the default
VLAN (VLAN #1), of which all ports are members. This is the IP
address you use to access the CLI, Web interface, or SNMP interface
for the switch.
SNMP
To setup an IP address:
Please enter the IP address of the device (A.B.C.D):
[A.B.C.D]
Please enter the IP subnet mask (A.B.C.D or /nn):
[A.B.C.D
IP IP
Enter
4
Finally, setup the default gateway. Please enter the IP address of
the gateway from which this network is reachable(e.g. 192.168.1.1):
Enter
This is the configuration information that has been collected:
SNMP Interface = "Dell Network Manager"@192.168.1.10
SNMP
User Account setup = admin
Password = **********
Management IP address = 192.168.1.100 255.255.255.0
IP
Default Gateway = 192.168.1.1
40
IP
/nn]
192.168.1.100
= "Dell Network Manager"@192.168.1.10
= 192.168.1.100 255.255.255.0
IP
IP
IP
IP
= admin
= **********
= 192.168.1.1
VLAN [VLAN #1]
CLI Web
IP
255.255.255.0
[ 192.168.1.1]
IP
IP
IP