Dell PowerConnect 3524 Handbuch Zum Einstieg Seite 41

[Y]
To setup the SNMP management account you must specify the management
system IP address and the "community string" or password that the
particular management system uses to access the switch. The wizard
automatically assigns the highest access level [Privilege Level 15]
to this account. You can use Dell Network Manager or other management
interfaces to change this setting later, and to add additional
management system later. For more information on adding management
systems, see the user documentation.
IP
To add a management station:
Please enter the SNMP community string to be used:[MYSETUPWIZARD] >>
Dell Network Manager
Dell Network Manager
IP
192.168.1.10 Enter
2
Now we need to setup your initial privilege (Level 15) user account.
This account is used to login to the CLI and Web interface. You may
setup other accounts and change privilege levels later. For more
information on setting up user accounts and changing privilege
levels, see the user documentation.
To setup a user account:
Please enter the user name:
Please enter the user password:
Please reenter the user password:
•
"admin"
•
Enter
[
(A.B.C.D)
CLI
SNMP
15] Dell Network Manager
SNMP
(0.0.0.0)
Web
[MYSETUPWIZARD] >>
[ 15]
39