SOLAC TASTE SLIM PRO INOX Gebrauchsanleitung Seite 10

TABLE OF PROBLEMS AND SOLUTIONS
PROBLEM CAUSE
Water leakage from the There is excess water in the drip tray.
bottom of the coffee
Malfunctioning of the machine.
maker
Water or coffee comes The filter holder is not properly fitted.
out of the edge of the
The rim of the filter and filter holder is
filter holder.
covered with coffee.
The machine does not The power cable is not properly plugged
turn on in.
Malfunction of the machine.
No water comes out The tank is empty.
Malfunction of the machine.
No steam coming out The vaporiser is clogged.
The tank is empty.
Malfunction of the machine.
No milk froth The vapour indicator is still flashing.
The container is too large or the shape
does not fit.
He has used skimmed milk.
Coffee comes out too The coffee grind is too coarse.
quickly
There is not enough coffee in the filter.
The coffee has not been sufficiently
pressed.
SOLUTION
Empty and clean the tray.
Contact the authorised service.
Remove the filter holder and fit it correctly.
Wipe the edge of the filter with a damp cloth.
Connect the power cord to a power outlet
correctly.
Contact the authorised service.
Pour water into the tank.
Contact the authorised service.
Clean the vaporiser.
Pour water into the tank.
Contact the authorised service.
Wait until the steam indicator is steady before
opening the steam knob.
Use a container suitable for the amount you wish
to foam.
Use whole milk.
Use a finer ground or espresso machine coffee.
Use a measuring spoon according to 'Filling the
coffee'.
Press the coffee further with the end of the
measuring spoon.