General Information - Hilti TE 30 Bedienungsanleitung

ORIGINAL OPERATING INSTRUCTIONS
TE 30 / TE 30-AVR / TE 30-C-AVR / TE 30-M-AVR rotary hammer
It is essential that the operating instructions
are read before the power tool is operated for
the first time.
Always keep these operating instructions to-
gether with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to other
persons.
Contents
1 General information
2 Description
3 Insert tools, accessories
4 Technical data
5 Safety instructions
6 Before use
7 Operation
8 Care and maintenance
9 Troubleshooting
10 Disposal
11 Manufacturer's warranty - tools
12 EC declaration of conformity (original)

1 General information

1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the
power tool" always refers to the TE 30, TE 30-AVR,
TE 30-C-AVR or TE 30-M-AVR rotary hammer.
Components, operating controls and indicators 1
Chuck
@
Function selector switch
;
Control switch
Page
=
Forward / reverse switch
15
%
Side handle with depth gauge
16
&
TPS indicator (TE 30-M-AVR)
18
(
Signal receiving area for the TPS key
19
)
AVR Active Vibration Reduction (optional)
20
+
23
23
25
26
26
27
27
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning:
electricity
en
15