Safety Advice; Safe Working Practice - Monstershop Electrostatic Powder Coating Machine Bedienungsanleitung

24015 - Electrostatic Powder Coating Machine

SAFETY ADVICE

SAFE WORKING PRACTICE

Please read through the safe working practice to ensure prevention of injury or damage to
the device.
This machine must not be used in damp or wet conditions. When not in use, store in a dry
location. Do not use/store outdoors.
The area must be clean and well ventilated.
Do not use in an area exposed to flammable or corrosive gases.
Ensure that there are no open flames or live wires in the work area when spraying. Do not
smoke when operating this machine.
You must wear a Tyvek suit or appropriate coveralls to protect your skin, as the powder
material/paint can cause irritation. Check the individual safety recommendations of
product you are using.
You must wear gloves and sufficient eye protection at all times, as the powder material/
paint can cause irritation. Check the individual safety recommendations of the product you
are using.
You must wear a dust mask at all times whilst using and working around the machine.
Ensure that long hair is covered or bound. Do not wear loose clothing or jewellery when
operating this machine.
Do not modify the equipment or attempt to use for any purpose other than that which it is
intended.
Use only appropriate attachments. Each attachment is for a specific function. You should
not use attachments which were not designed for this machine.
Do not overreach when operating this machine. Maintain proper balance and footing, and
do not reach across running machines.
07