Product Description - Monstershop Electrostatic Powder Coating Machine Bedienungsanleitung

SPECIFICATION

PRODUCT DESCRIPTION

This machine is used in the production process of powder coating. Hang the work piece
to be coated in a well ventilated area and ground appropriately to achieve consistent
coverage using the powder coating machine. Ensure the item is appropriately cured once
coated.
We at Monster Group UK understand that it is a new and exciting purchase, and although
it is tempting to get stuck in, please CAREFULLY read the instructions and safe working
practices before you start using the machine.
Please Note: The T-Mech Electrostatic Powder Coating Machine is designed to be used
by a competent person. It should not be used or stored in wet or damp conditions.
Personal Protective Equipment (PPE) must be worn by the operator of this equipment.
Please refer to and read Safety Advice, Safe Working Practice to ensure prevention of
injury or damage to the device before starting.
ITEM CONTENTS
1. 1 x Control Panel and Support Bracket and Powder Gun Holder
2. 1 x Base Plate
3. 1 x Support Post
4. 1 x Moisture Filter, with Bracket
5. 1 x Fluidisation Regulator with Bracket
6. 1 x Manual Coating Gun with Nozzles, Cable and Velcro Wraps
7. 1 x Powder Hose for Gun
8. 1 x Stainless Steel Hopper with Lid and Seal
9. 1 x Injector
10. 4 x Small Screws
11. 8 x Small Bolts with 4 x Nuts
12. 4 x Large Bolts
13. 4 x Wheels with Large Nuts
14. 4 x Hopper Bumpers
15. 1 x Long Clear Air Tube
16. 1 x Regular Clear Air Tube and 1 x Blue Air Tube
17. 1 x Venting Tube
02