VEVOR SCA-60W Bedienungsanleitung Seite 11

ITEM
1
2
3
4
5
6
7
1. Adjust present time:
Press "H" to adjust the hour until the figure comes stable, then press "M" to
adjust minutes.
2. Set temperature:
Press "P" to set temperature, then press"▲" or "▼"to control the
temperature until the figure comes stable after about 3 seconds
(setting range 35-110℃/95-230℉, default temp is 60℃/140℉)
3. Work mode:
3.1 Normal working mode
Press "P" to start the sauna heater directly, its operation time can last 4
hours.
3.2 Preset working mode
A. Auto-start setting (Max 24hours):
Press "Prepare to place" to fix the time, then press "H" and "M" to set time
before "P" to finish.
B. Auto-Stop setting (Min 10mins, Max 4hours):
Press "Control time" to adjust the time, then press "H" and "M" to set time,
before time table finishing blink.
Remark:
Step 1:3.1 and 3.2.A must be operated during unworking of sauna heater;
Step 2 :and 3.2.B must be operated during working of sauna heater)
SAUNA ROCKS
DESCRIPTION
Time Table
Temperature Table
Prepare to Place
Control Time
Ozone Output (Optional)
Power of Room Light
Power of Heater
- 10 -