KEYI ClicBot Bedienungsanleitung Seite 14

FAQs
How to turn on/off ClicBot? Does the ClicBot have to be connected to the
Internet, while operating?
Press and hold the power button on the rear side
of Brain for 3 seconds to turn on ClicBot.
No, but it needs to be connected to the Internet to
Press the power button on the rear side of Brain
check for update.
and then choose the shutdown option to turn off
ClicBot, or press and hold the power button for 7
Does the ClicBot Robot have to be used with
seconds to get a force shutdown.
the ClicBot App?
Why is the ClicBot shut down automatically?
No, it can be controlled manually with the screen
on the Brain.
To maintain the battery and motor performance,
ClicBot will be shut down automatically in the
What is the maximum distance of remote
following situation:
control with ClicBot App
1.It hasn't been operated for over 20 minutes;
2.Battery capacity is below 10%.
It depends on the connection mode of the robot to
the ClicBot App:
How long does it take for the ClicBot to be fully
·Via router, it is up to 10m which may be different
charged and how long can it run continuously?
due to the performance of router.
·Via hotspot, it is up to 5m.
It takes 3 hours with a 5V/2A charger to have it
fully charged, and it can run continuously up to 4
hours.
24
All manuals and user guides at all-guides.com
Can ClicBot's functions be updated ?
Brain?
The ClicBot modules can be upgraded online.
Connect the Brain to Wi-Fi, swipe upwards to
The camera for face detection & recognition is
enter the system menue and select update located in the upper-left triangle area of the
functions to check/download new functions. screen on the Brain, and it can identify faces at a
Connect other modules to Brain to automatically distance of 1 m.
start the update, follow the instructions on the
screen to upgrade modules.
Brain?
What is the recognition distance of gestures
The camera for motion detection is located in
like blocking, waving and etc. on the Brain?
the upper-left triangle of the screen on the
The gesture sensor is located in the upper-left
Brain, and it can detect the movement at a
triangle area of the screen of the Brain. Please
distance range between 1 and 5 m.
keep your hand at a distance of 5-20 cm for
blocking and waving, etc.
Brain?
What is the obstacle detection distance range
of the Brain?
The Brain is equipped with a 2-megapixel
camera which is capable for controlling the
The gesture sensor is located in the upper-left
robot from the first-person point of view(under
triangle area of the screen of Brain Module, and
development), face detection & recognition and
it can detect the obstacle at a distance between 5
motion detection.
and 20 cm in front of the robots.
What is the face recognition distance of the What is the rotation range of the screen on the
Brain?
The rotation range of the screen is up to 24
degree in the horizontal direction which can be
set up in the ClicBot App. Please do not rotate the
screen manually.
What is the motion detection distance of the How is a ClicBot Robot assembled?
The ClicBot is installed with a smart assembling
guidance system. After choosing which robot is
to be assembled, there will be a step-by-step
instruction shown on the screen of the Brain,
and the indicator light will flash as indication.
The system will automatically check whether all
the modules have been assembled correctly and
What is the purpose of the camera on the
show alert message on the screen in case of any
error while the indicator light is blinking quickly.
And the system will automatically adjust the
angle of connection as long as the two modules
are correctly assembled.
FAQs
Why do the indicator lights of a module flash?
The indicator lights are used for indicating the
status of a module, mainly including:
Constant on - Operation normally
Flashing - Module assembly required
Blinking quickly - Assembly error
What is the programming language applicable
to the ClicBot?
Currently, ClicBot supports graphic
programming.
What are the editable modules applicable to
the ClicBot?
The ClicBot supports over 20 editable modules,
including the screen of the Brain, loudspeaker,
Joint, Wheel, and the color of the strip lights of
Skeleton.
25