HOMCOM 820-294V70 Bedienungsanleitung Seite 10

1. After plugging in the power supply, turn on the power switch, the product buzzer
call and show the environment temperature. The product is in standby mode.
2. Press the setting button to enter the Current actual time setting mode. press
"add" and "reduce" to adjust time. Click "ok" key when the time is chosen in every
time. Press the cancel key to return to the previous step, double-click the Cancel
button to return to standby mode, or cancel the week timing.
3. After the confirmation of the actual time, the Sun (Sunday) is flashing on the top
of the screen. Click the up and down keys to choose the actual days of today.
After selecting the actual day of today, such as Mon (Monday), press the
confirmation button. At this time Mon is often bright, press up and down key to set
time of Monday opening time, after finished opening time, press up and down key
to set closing time. After finished closing time, press up and down to set
temperature you want in the Monday. The rest of the day is done according to this
procedure until one week is complete. If you choose the working time at 00 and
press the confirmation button, that is, choose not to work in this day of week.
4. When the week timer is set, the regular product working will not affect the timing
of week time when week time is not working. If the time is open at the weekly
time, but the product is still in regular working, the week time will be fail. During
the week timer of product working, if any key on the remote control and product
are pressed , week timer is also invalid on that day. The product is directly shut
down and can only be reorganized or set up. After setting the week timer, the
screen will be displayed according to the regular working mode. After regular
working shutdown, restore the week timer standby time. Press the Cancel button
two times, or turn off the power switch, or pull out the power cord, or power
failure. You need to reset it.
Adaptive start control
When the product is in standby mode, or the product is not working when the week
timer is set, if the product is induced to the environment temperature below 5 or 5
centigrade, the product automatically open, until the environment temperature
rises to 10 degrees C, the product is automatically switched off, This function is
closed if the product is working regularly or working in week timer.
Remote control
1. All the functions performed with the remote control work identically to the panel
control.
2. When don't use the remote control, remove the batteries before storage.
Weekly timer setting
9