Digital Channel (Digital)
Digital Channel is only available in DTV mode.
N
•
Channel
: Set the Channel number using the ▲, ▼ or number (0~9) buttons.
•
Frequency
: Set the frequency using the number buttons.
Bandwidth
•
: Set the bandwidth using the ▲, ▼ or number (0~9) buttons.
When it has finished, channels are updated in the channel list.
N
Analogue Channel
Manual store for analogue channel.
•
Programme
(Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)
buttons.
•
Colour System → Auto / PAL / SECAM / NTSC 4.43
•
Sound System
→ BG / DK / I / L : Sets the sound system value using the ▲ or ▼ button.
•
Channel
(When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S
(Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
If there is abnormal sound or no sound, reselect the sound standard required.
N
•
Search
(When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the first channel or the channel that you selected is received on the screen.
•
Store
(When you store the channel and associated programme number): Set to OK by pressing the ENTER E button.
Channel mode
N
- C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.
- S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Satellite Manual Store
•
Satellite
: Selects the satellite using the up/down buttons.
•
Index
: Selects the transponder using the up/down buttons.
•
Scan Mode
: Selects either free or all channels to store.
•
Frequency
: Sets the frequency using the numeric buttons.
•
Symbol Rat
e : Sets the symbol rate using the numeric or up/down buttons.
•
Polarity
: Sets the Polarity using the up/down buttons.
•
Network Search
: Enable/Disable network search using the up/down buttons.
•
Signal Quality
: Display the current status of broadcasting signal.
Information on a satellite and its transponder is subject to change depending on the broadcasting conditions.
N
Cable Search Option
❑
You can add directly the channel search range in the network search mode. (Dependingon the each country)
•
Freq.Start
: Displays the frequency start values.
Freq.Stop
•
: Displays the frequency stop values.
•
Modulation
: Displays available modulation values.
•
Symbol Rate
: Displays available symbol rates.
If the
Freq.Start value is bigger than Freq.Stop value, the warning message is displayed.
N
Full Guide / Mini Guide
❑
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out
of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information
becomes available.
•
Full Guide
: Displays the programme information as time ordered One hour segments. One hours of programme information is
displayed which may be scrolled forwards or backwards in time.
•
Mini Guide
: The information of each programme is displayed by each line on the current channel Mini Guide screen from the
current programme onwards according to the programme starting time order.
: Sets the colour system value using the ▲ or ▼ button.
English - 13
Continued...