Alarm Function; Sleep Function; System Settings; Setting The Time/Date Manually - Soundmaster Dai 3 Bedienungsanleitung

ALARM FUNCTION

Here you can preselect a time for the device to wake you.
Press and hold "MENU/INFO" button to open system menu, select "system" and confirm
1.
with "SCAN/SELECT".
Use " " to select Alarms and confirm with "SCAN/SELECT".
2.
Use " " to select Alarm 1 or Alarm 2 and confirm with "OK".
3.
"to select Alarm and use "SCAN/SELECT" to switch
4. Use"
between On and Off.
Use" " to select Time and confirm with "SCAN/SELECT".
5.
Use " " and to set the hour and the minute, then
6.
confirm each with "SCAN/SELECT".
"to select Source and confirm with "SCAN/SELECT".
7. Use"
Use " " to select between FM, DAB and Buzzer
8.
and confirm with "SCAN/SELECT".
"to select Repeat and confirm with "SCAN/SELECT".
9. Use"
10. Use " " to select between Once, Daily,
Weekends and Workday and confirm with "SCAN/SELECT".
11. Use " " to select Volume and confirm with "SCAN/SELECT".
12. Use " " to select duration and confirm with "SCAN/SELECT".
13. Quit the menu with "MENU/INFO" button.
The alarm symbol 1 or 2 lights up in the display.
14. Switch the device to standby with " /MODE" if necessary. The selected alarm signal
will sound at the set time.
➢ Press any button to snooze the alarm 5 minutes. (Except Flash light and SOS buttons)
Display will show snooze timing counter.
Press " /MODE" to deactivate the alarm signal completely.
➢
Here you can pre-select a time after which the device switches off automatically.
1. Press and hold "MENU/INFO" button to open the system menu, select "system" and confirm
with "SCAN/SELECT".
" to select Sleep and confirm with SCAN/SELECT.
2. Use"
3. Use " " to select between 15 > 30 > 45 > 60 > 75 > 90 minutes and Off.
4. Briefly press "SCAN/SELECT" to confirm.
The display shows "SXX" and "XX" means remaining sleep time.

SETTING THE TIME/DATE MANUALLY

If you do not have any DAB reception, you can also configure the time and date manually.
1. Press and hold the "MENU/INFO" button to open the system menu, select "system" and
confirm with "SCAN/SELECT".
2. Use " " to select "Time/Date" and confirm with "SCAN/SELECT".
" to select "Set Time/Date" and confirm with "SCAN/SELECT".
3. Use"
4. Use " " to set Day – Month – Year – Hour –
ALARM AND SLEEP FUNCTION

SLEEP FUNCTION

SYSTEM SETTINGS

6