Drc (Dynamic Range Compression; Audio Sync; Hdmi Audio; System - Samsung HT-D350 Bedienungsanleitung

DRC (Dynamic Range Compression)

This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
•
You can select either Full, 6/8, 4/8, 2/8, off.

AUDIO SYNC

Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video
•
You can set the audio delay time between 0ms
and 300ms. Set it to the optimal status.

HDMI AUDIO

The audio signals transmitted over the HDMI Cable
can be toggled On/Off.
•
Off : Video is transmitted over the HDMI
connection cable only, and audio is output
through the product speakers only.
•
On : Both video and audio signals are transmitted
over the HDMI connection cable, and audio
is output through your TV speakers only.
✎
NOTE

The default setting of this function is HDMI Audio Off.

HDMI Audio is automatically down-mixed to 2ch for
TV speakers.

When HDMI Audio is set to On, PL II /DSP EQ
/P.BASS doesn't work.

With HDMI AUDIO set to 'On', the volume can be
adjusted only using the TV remote control.
HT-D350-XU_ENG-1228.indd 21 HT-D350-XU_ENG-1228.indd 21

System

Initial Settings

By using the Initial Settings, you can set the language and
TV aspect.
✎
NOTE

If the HDMI cable is connected to the product,
TV aspect does not appear and it is set to 16:9
Wide automatically.

DivX(R) Registration

View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content.

Language

You can select the language you prefer for on-
screen menu, disc menu, etc.
OSD Select the language for the on-
Language screen displays.
Select the language for the disc
Disc Menu
menu displays.
Audio Select the language for disc audio.
Subtitle
Select the language for disc subtitles.
a To select a language that does not appear in the
menu, select OTHERS in the Disc Menu, Audio and
Subtitle, and enter the language code of your
country (see page 31).
a You cannot select OTHERS in the OSD Language
menu.
✎
NOTE

The selected language will only appear if it is
supported on the disc.
21
English
2011-12-28 2011-12-28 3:10:19 3:10:19