Important Safety Instructions - Vevor Rtd-10-50In.lbb Benutzerhandbuch

Warning - To reduce the risk of injury, the user must read the
instructions manual carefully.
This symbol, placed before a safety comment, indicates a kind of
precaution, warning, or danger. Ignoring this warning may lead to
an accident. To reduce the risk of injury, fire, or electrocution,
please always follow the recommendations shown below.
1. This product is only suitable for tightening and testing within the
calibration range.
2. Do not use strong impact during use.
3. Absolutely not allowed to use as other tools.
4. The starter "kada". Do not continue to apply force after the alarm.
5. The measured value of this product has been corrected, and it is not
allowed to disassemble it privately, so as to avoid errors in measurement
accuracy.
6. After use, the torque value should be adjusted to zero to maintain the
screwdriver's precision and prolong the service life.
7. This product should not be in contact with acids, alkalis and corrosive
gases.
8. If you can not turn these tools by hand, you can install an afterburner on
the tail of the torque driver.
1 PRODUCT OVERVIEWS
Top-grade preset torque drivers are used to tighten work pieces to meet torque
requirements. The product operates counterclockwise and can preset torque
values. If the set value is idling beyond the set value, the thread tightening can be
controlled preferentially. It is suitable for precision instrument screw locking, circuit
board fixing, etc., which have high requirements for screw locking and high
requirements on locking precision. Widely used in a variety of electrical, light
industry, machinery manufacturing, scientific research structure and other
industries.

IMPORTANT SAFETY INSTRUCTIONS

- 2 -