iStorage DATASHUR PRO2 Benutzerhandbuch Seite 40

44. How to check Firmware in User Mode
To check the fi rmware revision number, fi rst enter the "User Mode" as described in section 14. Once the drive is in User Mode (solid
GREEN LED) proceed with the following steps.
1. In User mode press and hold down both "3 + 8"
buttons until GREEN and
2. Press the KEY ( ) button and the following happens;
a. All LED's (RED, GREEN
b. RED LED blinks indicating the integral part of the fi rmware revision number.
c. GREEN LED blinks indicating the fractional part.
d BLUE LED blinks indicating the last digit of the fi rmware revision number
e. All LED's (RED, GREEN
f. RED, GREEN & BLUE LEDs switch to a solid
For example, if the fi rmware revision number is '2.5', the
the sequence has ended the RED,
#40
BLUE LEDs blink together
& BLUE) become solid for 1 second.
& BLUE) become solid for 1 second.
BLUE LED
GREEN & BLUE LED's will blink together once and then return to Admin mode, a solid
Solid
and
RED LED will blink twice (2) and the
www.istorage-uk.com
GREEN LED will change to blinking
BLUE LEDs
GREEN LED will blink fi ve (5) times. Once
GREEN
BLUE LED.