iStorage DATASHUR PRO2 Benutzerhandbuch Seite 39

42.
Hibernating, Suspending, or Logging off from the Operating System
Be sure to save and close all the fi les on your datAshur PRO
operating system.
It is recommended that you lock the datAshur PRO
system.
To lock, simply click the 'Safely Remove Hardware/Eject' icon within your operating system and unplug the datAshur PRO
Attention:
43. How to check Firmware in Admin mode
To check the fi rmware revision number, fi rst enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode
(solid BLUE LED) proceed with the following steps.
1. In Admin mode press and hold down both "3 + 8"
buttons
2. Press the KEY ( ) button once and the following happens;
a. All LED's (RED, GREEN & BLUE) become solid for 1 second.
b. RED LED blinks indicating the integral part of the fi rmware revision number.
c. GREEN LED blinks indicating the fractional part.
d BLUE LED blinks indicating the last digit of the fi rmware revision number
e. All LED's (RED, GREEN & BLUE) become solid for 1 second.
f. RED, GREEN & BLUE LEDs switch to a solid
For example, if the fi rmware revision number is '2.5', the
the sequence has ended the RED,
2
manually before hibernating, suspending, or logging off from your
To ensure your data is secure, be sure to lock your datAshur PRO
computer.
BLUE LED
RED
GREEN & BLUE LED's will blink together once and then return to Admin mode, a solid
www.istorage-uk.com
2
before hibernating, suspending, or logging off from the
Solid
BLUE
LED will blink twice (2) and the
2 if you are away from your
BLUE LED will change to blinking
LEDs
GREEN LED will blink fi ve (5) times. Once
2
.
GREEN and
BLUE LED.
#39