Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BEFORE YOU USE THIS WATCH, IT IS
RECOMMENDED THAT YOU MANUALLY WIND
THE MAINSPRING TO START IT MOVING.
THIS WATCH IS AN AUTOMATIC WATCH EQUIPPED
WITH A MANUAL WINDING MECHANISM.
WINDING THE MAINSPRING
1. When the crown is in position [0],
turn the crown clockwise to wind.
Wind 5-10 times and it will start to
0
move naturally after shaking slightly.
* This watch MUST be worn for at least 8 (Eight)
hours each day to ensure it is fully wound. An
automatic watch will only wind when the watch
is on your wrist and your arm moves. Winding the
watch by the crown will put power on the spring
but not enough to allow the watch to function
fully. If your watch stops overnight or loses time
it means it is not being fully wound.
IMPORTANT NOTE
1. If your watch is running smoothly, please do not
wind the crown to avoid overwinding the
movement. Provided you are wearing the watch
frequently, your watch should have sufficient
power to operate without any fuss.
2. If your watch has stopped running after a period
of not wearing the watch, gently move the watch
side to side 20 to 30 times to move the rotor or
gently turn the crown 5 to 10 times to get the
second hand run at its normal speed.
2
3
Werbung
