BYSTRO RIO BYS-WHRIO90-SS Montageanleitung Seite 94

EN CONTROLS
1. Switch the lights on and off.
2. Increases the motor speed.
3. Reduces the motor speed.
4. Turn the motor off.
5. It activated the TIMER function of the control.
Set up of the remote control
The remote control is set up by the manufacturer. If the remote control is not
controlling motor or light nearby the cooker hood, please do the following.
Keep pressing the 2 button of the remote control and then connect the cooker
hood, to confirm that the remote control has been recognized a long beep is
issued. If you do not hear the acoustic signal within 30 seconds, please repeat
the steps as described.
Interval Function by remote control
Ÿ
Ÿ
Ÿ
When you are in the setting phase, if the interval function shown is not
confirmed within some seconds, then you get out of the setting mode for the
interval function.
By pressing any push button, light excluded, the interval function is excluded.
Filtering/suction function setting (only with hood without push-button
panel)
The standard hood is supplied as suction (alarm signal with 3 acoustic signals
2
1
3
Where foreseen, the prolonged pressure varies with the intensity of the light.
Where foreseen, the prolonged pressure changes the color temperature of
the light.
Reset active filter counters.
Keep pressing the 4 push button. for the speeds 1.
Keep pressing the 2 push button, for the speeds of the motor 2→3→1→2 ...
Press the 4 push button to confirm the speed of the motor for the interval
function.
5
4
EN 7