Safety Instructions; Electrical Connection - Bystro Rio Bys-Whrio90-Ss Montageanleitung

comply with conditions specified in the overvoltage
category III. The means for disconnection must be
incorporated in the fixed wiring in accordance with the
wiring rules.
Do not flambé under the appliance.
Ÿ
Do not use to exhaust hazardous or explosive materials
Ÿ
and vapours.
Clean the appliance regularly with a soft cloth to prevent
Ÿ
the deterioration of the surface material.
Do not use a steam cleaner, water spray, harsh abrasive
Ÿ
cleaners or sharp metal scrapers to clean the surface of
the appliance. Use only neutral detergents.
Clean grease filters regularly (at least every 2 months) and
Ÿ
remove grease deposits from the appliance to prevent the
risk of fire.
Use a cloth to clean the interior of the appliance.
Ÿ

2. SAFETY INSTRUCTIONS

2.1 lnstallation

WARNING!
Risk of injury, electric shock, fire, burns or
damage to the appliance.
Ÿ
Only a qualified person must install this
appliance.
Ÿ
Do not install or use a damaged appliance.
Ÿ
Follow the installation instructions supplied
with the appliance.
Ÿ
Always take care when moving the appliance
as it is heavy. Always use safety gloves and
enclosed footwear.
Ÿ
Before installing the appliance remove all the
packaging, the labelling and the protective
film.
Ÿ
Do not install the exhaust air into a wall
cavity, unless the cavity is designed for that
purpose.

2.2 Electrical connection


WARNING!
Risk of fire and electric shock.
Ÿ
AII electrical connections should be made by
a qualified electrician.
Ÿ
Make sure that the parameters on the rating
plate are compatible with the electrical
ratings of the mains power supply.

Ÿ
lf the symbol is not printed on the rating
plate, the appliance must be earthed.
Ÿ
Always use a correctly installed shockproof
socket.
Ÿ
Do not let the electricity mains cable tangle.
Ÿ
Do not use multi-plug adapters and
extension cables.
Ÿ
lf the mains socket is loose, do not connect
the mains plug.
Ÿ
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
Ÿ
The shock protection of live and insulated
parts must be fastened in such a way that it
cannot be removed without tools.
Ÿ
Make sure the appliance is installed
correctly. Loose and incorrect electricity
mains cable can make the terminal become
too hot.
Ÿ
Connect the appliance at the end of the
installation. Make sure that there is access to
the mains after the installation.
EN 19