Werbung
[EN]
BWT Medo Connect Duo analysers / Controllers for swimming pools
Important note on safety
Learn life-saving techniques
Memorise and display the first aid numbers near the pool (FRANCE):
‐
Fire brigade:
SAMU :
‐
Poison Control Centres(24/7) :
‐
ANGERS
LILLE
MARSEILLE
PARIS
This appliance may be used by children of at least 8 years of age and by persons with reduced physical, sensory or
mental capabilities or lacking experience or knowledge, if they are properly supervised or if they have been given
instructions on the safe use of the appliance and are aware of the risks involved. Children must not play with the
appliance. Cleaning and maintenance by the user must not be carried out by children without supervision.
A means of de-energising all active poles (phase(s) and neutral) must be provided on the power supply, upstream of the
appliance, so that the product can be systematically de-energised before any technical intervention. This device must
be located close to the appliance.
If the power cable is damaged, it must be replaced by the manufacturer or its authorised distributor.
The BWT Medo Connect Duo cabinet must be positioned at a minimum distance from the pool basin specified by the
regulations applicable at the place of installation. In France, this distance is 3.5 metres. However, if the power supply to
the unit is specifically protected by a 30 mA residual current device, this distance can be reduced to 2.0 metres (volume
2 below).
standard NF C15-100, part 7-702.
It is strongly recommended that your electrical installation be equipped with a lightning surge protection device.
For any resulting damage to the electrical and electronic components of the BWT Medo Connect Duo, the
General
The BWT MEDO CONNECT DUO analysers/controllers you have just purchased is a high-tech electronic device,
carefully designed and built for your pleasure and peace of mind. The simplicity, user-friendliness and technicality
of the BWT MEDO CONNECT DUO will guarantee you perfect control of the water quality of your pool or spa.
They are designed to regulate the pH and disinfectant chlorine content of swimming pool or spa water. The free
chlorine level can be measured directly (models equipped with an "amperometric" probe), or via the measurement
of the oxidation-reduction potential - ORP (models equipped with a "redox" probe).
The BWT MEDO CONNECT DUO controllers are available in 4 models:
For spas with a water volume of between 1 and 20 m
-
cell pH/chlorine control with 0.5 litre/hour pumps:
18
15
02 41 48 21 21
BURGUNDY
08 00 59 59 59
LYON
04 91 75 25 25
NANCY
01 40 05 48 48
TOULOUSE
warranty shall be void.
05 56 96 40 80
04 72 11 69 11
03 83 22 50 50
05 61 77 74 47
CAUTION
WARNING
3
outdoors or between 1 and 25 m
2
3
indoors: closed
2024/06 - Revision index: A - Code : 139232
Werbung
