cecotec ForceSilence 540 Smart Bedienungsanleitung Seite 17

4. OPERATION
Make sure you follow all the instructions correctly according to the image above. (Fig. 1).
Select the desired mode or function from the fan's main body or from the remote control.
1. To activate or stop the oscillation mode, press the button OSC.
2. To set the timer, press the TIME button. It can be scheduled for up to 7 hours.
3. You can adjust the kind of ventilation press the MODE button:
Breeze – ECO - Sleeping
4. Air's speed can also be adjusted by pressing SPEED:
1: Slow / 2: Medium / 3: Fast
Troubleshooting
Make sure the fan is turned off and unplugged from the power supply before touching its
blades, grids or motor.
- If the fan is turned on and connected to the power supply and the blades do not rotate:
• Make sure the cord is properly connected to the power supply or if the plug or power
supply is damaged.
• Make sure the grids are in good conditions and do not block the blades while spinning.
If any noise is heard while blades are spinning:
• Make sure the blades are properly fixed to the motor's shaft.
• Make sure all motor parts are well connected to the blades.
• Make sure the blades' ends are not damaged.
5. CLEANING AND MAINTENANCE
1• Always disconnect the appliance from the mains by switching it off and removing the plug
from the power outlet before cleaning.
2 • It is advisable to use a neutral detergent and a soft cloth and to rub dry. Do not use solvents,
acidic detergents, petrol or alcohol etc., to clean the plastic components, as these could be
deformed or damaged.
3 • Do not allow water to enter the motor during cleaning.
6. TECHNICAL SPECIFICATIONS
Product reference: 05206/05205
Model: ForceSilence 540/550 Smart
55 W, 220-240 V ~ 50 - 60 Hz
Made in China | Designed in Spain
05206_ForceSilence 540 Smart_MANUAL_DS_EA.indd 17
ENGLISH
FORCESILENCE 540/550 SMART 17
10/10/19 18:14