HyperX Pulsefire Saga Pro Schnellstartanleitung Seite 3

Bluetooth Pairing
Hold the left click button, right click button, and the DPI button simultaneously until the mouse ashes blue.
HOLD HOLD
Onboard Polling Rate Switch
The default polling rate is 1k polling rate
Enable 4k Wireless Polling Rate
1. Power o the mouse completely.
2. Press and hold the DPI button. While holding the DPI button, switch the mouse to 2.4G mode.
The wheel LED will fast-blink green four times.
To revert to the default 1k polling rate, follow the same procedure. The wheel LED will fast-blink green two times.
1. 2.
HOLD HOLD