Werbung
Verfügbare Sprachen
Verfügbare Sprachen
damaged or tangled cables can increase the risk of
electric shock.
When operating a power tool outdoors, use an extension
e)
cord suitable for outdoor use. The use of a cord suitable
for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
f)
unavoidable, use a power supply protected by a residual
current device (RCD). The use of an RCD reduces the risk
of electric shock.
3) Personal safety
Stay alert, watch what you are doing and use common
a)
sense when operating a power tool. Do not use a power
tool if you are tired or under the influence of drugs,
alcohol or medication. Lack of attention while operating
power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
b)
protection. Protective equipment such as dust mask,
non-skid safety footwear, helmet or hearing protection,
used under appropriate conditions, will reduce personal
injuries.
Avoid unintentional start-up. Make sure the switch
c)
is in the off position before connecting the tool to a
power source and/or battery, or before picking it up or
transporting it. Carrying power tools with your finger on
the switch or plugging in power tools with the switch in
the on position may cause accidents.
Remove any adjusting key or wrench before turning the
d)
power tool on. Leaving a wrench or a key attached to a
rotating part of the power tool may result in personal
injury.
Do not overstretch yourself. Always keep your feet firmly
e)
18
TITANIUMSWORD 2120 HAND XL
Werbung
