Cleaning An Maintenance; Handling And Transportation - Beko Rhp 7120 B Handbuch

5 Cleaning an maintenance

5.1 Cleaning
Before cleaning and assembling, fan
must be unplugged.
WARNING: Do not use any
abrasive detergent or sol-
A
vents to avoid scratching
the surface. Do not use any
of the following as a cleaner:
gasoline, thinner.
It is recommended that the heater be
cleaned at least one time during the op-
erating season in order to provide the
optimum level of performance. ALWAYS
TURN THE POWER
AND UNPLUG THE HEATER BEFORE
CLEANING. Be sure to save the box for
off- season storage.
• Turn the heater "OFF", unplug it and
wait for the heater to cool down.
• Use a dry cloth to clean only external
surfaces of the heater.
• Do not use any cleaning agents or de-
tergents.
• Never immerse the heater in water.
• Pack the heater in the original carton
and store it in a cool and dry place
WARNING: This heater cannot
achieve accurate tempera-
A
ture control of the environ-
ment, and thus cannot be
used as insulation device for
storage environment.
PTC Fan Heater / User Manual

5.2 Handling and transportation

• During handling and transportation,
• Do not place heavy loads on the appli-
• Dropping the appliance may render it
SWITCH OFF
carry the appliance in its original pack-
aging. The packaging of the appliance
protects it against physical damages.
ance or on the packaging. The appli-
ance may get damaged.
non operational or cause permanent
damage.
13 / EN