Machine Startup; Instructions For Operation Of Body - Beko Rhp 7120 B Handbuch

3 Operation
3.1 Check before turning on the
machine
• Check if the power wire is under good
condition.
• The product adopts 220-240V AC
power supply, before use, please con-
firm if the rated current of the power
socket meets the local requirements
with safe grounding device, otherwise,
please replace it with the qualified
socket.

3.2 Machine startup

The power light is lit after the plug is
plugged in and the power is applied;
the screen is off after a warning tone is
heard and the screen is flickered once;
the machine can be started after the
switch key is pressed (or ON/OFF but-
ton on the remote controller is pressed).
The machine will be operated under high
gear working state by default when it is
powered on for the first time; the screen
displays "HI" and the Default setting
temperatureis 35ºC.
10 / EN
3.3 Instructions for operation of
body
Function setting
'' '' key is pressed repeatedly; the heat-
er will be switched s per the circular or-
der of "high gearlow gear—ECO energy
saving gear—cool wind only (LED display
Co)".
Temperature setting
When the fan Heater in ECO mode , the
temperature can be set by pressing "+"
or "-", with the setting range of 5-35ºC.
When the setting temperature is reached,
the fan heater will stop the operation
;when the temperature is lower than the
set temperature, the machine will restart
the heating.
Timing function
Timing stop
When the heater is turned on, press the
TIMER key to enter the timing stop state
(within 0-24 hours), then press the "+"
key to increase the timing stop time , and
press the "-" key to decrease the tim-
ing stop time. After the timed shutdown
time is set, the timing can be canceled
through long-press of the TIMER key.
PTC Fan Heater / User Manual