WYBOT Osprey 200 Bedienungsanleitung Seite 9

3. A ach the retrieving hook to a standard pool pole (not included).
5.2 To use the robo c cleaner
1. Charge the ba ery
Fully charge the cleaner before each use. A ach the charging connector to the charging socket at
the bo om of the cleaner. Place the cleaner in its upright posi
the main electrical outlet. The indicator lamp on the charger shall turn red when charging. It
should turn green once fully charged.
NOTE: The rob
c cleaner must be charged indoor.
NOTE: It is strictly forbidden to face the bo om up to prevent the swing plate from being crushed
when charging.
NOTE: Clean and dry the charging socket before charging.
n and, then plug the charger into
Charging Socket
Power Bu on
6