WYBOT Osprey 200 Bedienungsanleitung Seite 10

2. Purge out the air
Hold the rob c cleaner with two hands and submerge it into the pool. Rotate the cleaner un l
no air bubble is coming out.
3. Turn on the power
While keeping the en re rob
bu on located at the bo om. Water will begin to ow out from the nozzle a er 5 seconds.
4. Release the cleaner
Hold the rob c cleaner in its upright posi
slowly sink to the pool oor. In case the cleaner is pped upside down, use the
correct its orienta
c cleaner underwater, switch on the product by pressing the power
n.
n and slowly release the product. The product shall
7
a ng handle to