AutoAqua Smart AWC touch Bedienungsanleitung Seite 6

English
Step 2 :
Connect ATO re ll
tube (pump
break*
holder).
Tank/Sump
*Note : Siphon break must be higher than the water level in
Air In :
Air In
Water Out :
Water Out
05
Step 3 :
Connect ATO re ll
pump's cable to P1.
siphon
tubing
the reservoir.
Siphon break allows air in to break the siphon
when the pump turns off.
Water drops out of the hole are normal when
the pump is on.
Arrow on siphon
break indicates
water flow direction.
ATO Refill Pump
ATO Reservoir