3. AWC Re lling Speed Setting
The re lling speed will select di erent lengths of re lling time. The lower the speed,
the longer the re lling process.
Speed 5
Speed 4
Speed 3
Speed 2
Speed 1
For example, one re lling process takes 25 sec. At Speed 3, the pump will re ll 10 sec
and pause 200 sec repeatedly until the completion of the re lling.
Re ll
Start
10 sec
Bene ts of AWC Re lling Speed Setting
Slower re lling of AWC water helps minimize temperature and
chemistry changes so as to reduce stress on aquarium
inhabitants. Also, it reduces the variation in water volume to be
changed.
Speci cations
1. Power Input : 100-240 VAC 50-60 Hz
2. DC Pump :
● Head : 8.2 ft (250 cm)
● Flow Rate : 74 gph (280 lph)
3. Max Mounting Thickness : 1/2 inch (12.7 mm)
4. Flexi Tubing : ID 6.5 mm / OD 9.0 mm
no pause during the re lling process
re ll 20 sec and pause 200 sec repeatedly
re ll 10 sec and pause 200 sec repeatedly
re ll 5 sec and pause 200 sec repeatedly
re ll 2 sec and pause 200 sec repeatedly
Pause
200 sec
Re ll
Pause
10 sec
200 sec
Optical Level Sensor
0.78 "
(20 mm)
Front View
English
Low Average Speed
Re ll
Finish
5 sec
Magnet
0.5"
(12.7 mm)
0.25 "
0.53 "
(6.4 mm)
(13.4 mm)
Side View
14