English - I.safe Mobile Is440.Rg Bedienungsanleitung

ENGLISH

PROTECT YOUR LIFE AND READ THE
OPERATING MANUAL
This Operating Manual is part of the device IS440.RG (model M440A01).
This Operating Manual provides important information for safe use of the device.
Before using the device, read this Operating Manual carefully and pay particular attention to
the warnings highlighted with the warning symbol. If you do not follow these instructions or
do not understand them, this could lead to death, severe injuries and damage to the device.
Make sure you have access to this Operating Manual when you need it. You can find the
current Operating Manual at www.isafe-mobile.com/en/support/downloads
Follow all instructions given on the device and on the packaging.
Follow local safety regulations.
Do not use the device in explosion hazardous areas.
Make sure that no gap can be seen between the two halves of the device.
Do not modify the device structurally.
Do not expose the device to high temperatures.
Do not expose the device to strong UV radiation.
Do not expose the device to processes with high electrical charges.
Do not expose the device to aggressive acids or bases.
Protect the device and the Power Adapter from strong electrical magnetic fields as for examp-
le those emitted by induction cookers or microwave ovens, for example.
Only use accessories approved by i.safe MOBILE GmbH.
Do not open the device or carry out any repairs yourself.
Do not use the device in places where its use is prohibited.
Turn off the device in clinics or other medical facilities.
Always keep a safety distance of at least 15 cm between the device and a pacemaker or
hearing aid. The device can affect the functioning of medical devices such as pacemakers and
hearing aids.
When using the device while driving a motor vehicle, be sure to comply with applicable
national laws.
When using earphones or headsets at the maximum volume setting, first set the volume
control on the device to 50 % of the maximum volume. Gradually adjust the volume.
Only charge the device using the charging equipment specified by i.safe MOBILE GmbH.
If you use a third-party USB power supply unit, note the following:
- The third-party USB power supply unit must comply with applicable country regulations
and international and regional safety standards.
- The third-party USB power supply unit must have a minimum output of 10 W to 15 W to
ensure the specified charging rates. The device does not support USB PD fast charging.
Only charge the device at ambient temperatures between 0 °C to +45 °C (+32 °F to +113 °F).
Only charge the device under dry indoor conditions.
Do not charge the device in environments dusty or humid.
4