Usb Interface - I.safe Mobile Is440.Rg Bedienungsanleitung

8-PIN ISM INTERFACE
Loosen the screw on the 8-pin ISM interface cover using the Screwdriver included in the
approved accessory package. Remove the cover as shown.
Connect the plug of the approved accessory to the 8-pin ISM interface as shown.
Hand-tighten the screws.
Check that the plug is seated correctly and securely.

USB INTERFACE

The USB interface is used for charging and data transfer.
Connect approved accessories or other devices to the USB interface only by using the
USB-C Cable or by using other equipment approved by i.safe MOBILE GmbH.
16