i.safe MOBILE IS440.RG Bedienungsanleitung Seite 13

INSERT/REMOVE SIM CARD
The device has a nano-SIM card slot and an additional eSIM. The eSIM is a non-removable,
integrated digital SIM. For more information contact your provider.
NOTICE
Proceeding incorrectly when inserting/removing the SIM card can damage the device
and the SIM card.
Switch off the device before inserting or removing a SIM card.
Do not charge the device while inserting or removing a SIM card.
Loosen the screws on the battery using the Torx Screwdriver provided.
Remove the battery from the battery compartment.
Insert the SIM card into the nano-SIM card slot (1) with the gold-coloured contacts facing
down.
Reinstall the battery. See section "Installing the battery".
Activate eSIM
You can activate the eSIM in several ways:
1. Via the Setup Wizard during initial device setup:
Scan the eSIM QR code that you have received from your service provider or manually enter
the eID that you have received from your service provider.
2. Via the settings menu of the device:
> Settings > Network & internet > SIMs > Download a SIM instead? > Next > scan (or ma-
nually enter) eSIM QR code that you have received from your service provider.
EN
1
13