Samsung ICD-833P/ACDC Bedienungsanleitung Seite 15

❿ AUTO...
This menu automatically converts the COLOR Mode into the BW Mode
E
or vice versa depending on illumination. In low illumination environments,
it turns off the IR Filter to raise sensitivity, otherwise it turns on the IR
Filter to lower sensitivity.
If you select the AUTO menu and press the [Enter] key, the BW LEVEL
Control AUTO BW submenu will appear on the menu screen. You will be
able to send out the BURST signal by turning on or off in this menu, set
up the DURATION TIME for conversion, or set up the standard
brightness level for converting the COLOR mode into the BW mode.
CAMERA ID ON...
IRIS LENS...
BLC/WDR OFF
COLOR/BW AUTO...
SHUTTER OFF
AGC ---
WHITE BAL ATW
SYNC INT
SPECIAL ...
EXIT QUIT
28
(AUTO BW)
press the
BURST ON
[ENTER] key
LEVEL LOW
DURATION S - I - - - - - L
RET
❿ EXT...
This menu automatically converts the COLOR Mode into the BW Mode
or vice versa depending on illumination with an external sensor. If you
select the EXIT menu and press the [Enter] key, the EXTERNAL BW
submenu will appear on the menu screen. You will be able to send out
the BURST signal by turning on or off in this menu.
CAMERA ID ON...
IRIS LENS...
BLC/WDR OFF
COLOR/BW EXT...
SHUTTER OFF
AGC OFF
press the
WHITE BAL ATW
[ENTER] key
SYNC INT
SPECIAL ...
EXIT QUIT
E
(EXTERNAL BW)
BURST ON
RET
29