Samsung ICD-833P/ACDC Bedienungsanleitung Seite 12

IRIS
E
This CAMERA has an IRIS function for automatic control of the brightness
level through the intensity of radiation. The ALC can select the LENS IRIS
level and ELC LEVEL.
❿ LENS...
If you select the LENS menu and press the [ENTER] key, the sub-screen
will appear to set the brightness level. Here, you are able to set the
brightness level by pressing the LEFT or RIGHT key in the LEVEL menu.
Level setting is available only by using the DC IRIS lens.
Then, you shall puts the ALC LENS selection switch on the side of the
camera in the "DC" position.
CAMERA ID ON...
IRIS LENS...
BLC/WDR OFF
COLOR/BW COLOR
SHUTTER OFF
AGC OFF
WHITE BAL ATW
SYNC INT
SPECIAL ...
EXIT QUIT
22
(IRIS/LENS)
press the
[ENTER] key
LEVEL (0) ----I----
RET
❿ ELC...
This menu controls the High Speed Shutter Level within a limited range
in the event of too intensive radiation from outside while using the
Manual Lens. If you select the ELC in the IRIS menu and press the
[ENTER] key, the following subscreen will appear. Here, you are able to
set the level by pressing the LEFT or RIGHT key.
CAMERA ID ON...
IRIS ELC...
BLC/WDR OFF
COLOR/BW COLOR
SHUTTER OFF
press the
AGC OFF
[ENTER] key
WHITE BAL ATW
SYNC INT
SPECIAL ...
EXIT QUIT
E
(IRIS/ELC)
LEVEL (0) ----I----
RET
23