Use With An External Dmx Controller - Renkforce v1384778 Bedienungsanleitung

b) Use with an External DMX Controller
Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identified by the
controller. This DMX starting address specifies the first DMX channel to which the effect light responds.
The remaining control channels come after this first DMX channel (DMX starting address).
The effect light requires 4, 6 or 8 free DMX channels depending on DMX operating mode.
Setting the DMX starting address
• Set the desired DMX starting address (A001-A512) in the menu Addr.
Setting the DMX operating mode
• Set the desired number of DMX channels with the option 4CH / 6CH / 8CH in the menu CHnd.
The following tables provide information about the effects of the settings on the individual DMX channels.
4-channel DMX operation
DMX channel Value
1 000-255
2 000-255
3 000-255
4 000-255
6-channel DMX operation
DMX channel Value
1 000-255
2 000-255
3 000-255
4 000-255
5 000-255
6 000-006
007-065
066-069
070-128
129-132
133-191
192-195
196-255
28
Function
Brightness red 0-100%
Brightness green 0-100%
Brightness blue 0-100%
Brightness white 0-100%
Function
Brightness red 0-100%
Brightness green 0-100%
Brightness blue 0-100%
Brightness white 0-100%
Total brightness 0-100%
No strobe effect
Strobe speed slow > fast
Light off
Pulsing strobe effect slow > fast
Light off
Colour strobe with fade-in effect slow > fast
Light off
Colour strobe with fade-out effect slow > fast